Yener Ticaret

How do you choose a antifouling marine paint?

10 November 2026 · 2 min read

How do you choose a antifouling marine paint?
In shortThe choice of antifouling paint is determined by the vessel’s operational profile, dry-docking interval, speed and existing paint system. An incorrect choice increases fuel consumption and results in additional costs at the next dry-docking.

What is the purpose of antifouling paint?

Algae, mussels, crustaceans and a layer of slime quickly form on any surface left in seawater. This biofouling increases the hull’s drag; the boat slows down, and more fuel is consumed to maintain the same speed. Antifouling paint is a topcoat that releases active ingredients in a controlled manner, making it difficult for organisms to attach to the underwater surface.

Five questions to guide your choice

1. When is the next dry-docking?

Antifouling paints are designed for a specific service life. Whilst economical products are sufficient for short dry-docking intervals, products with a higher solids content and controlled release are preferred for longer intervals. In the Jotun product range, for example, SeaForce 90 has been developed for dry-docking intervals of up to 60 months.

2. How active is the vessel?

The requirements differ between vessels that sail frequently at high speeds and those that remain moored in port for extended periods. Vessels with long lay-up periods face a higher risk of biofouling; in such cases, it is important that the paint remains effective even at low speeds.

3. In which region does the vessel operate?

In warm waters such as the Mediterranean, the pressure from fouling is higher than in cold waters. The operating region plays a direct role in product selection.

4. What is the existing paint system?

The new antifouling paint must be compatible with the existing system. If the old paint is sound, it can be applied over a suitable primer coat following cleaning with high-pressure fresh water; however, a complete system renewal is required on deteriorated surfaces.

5. Budget and expected performance

Higher-performance antifouling paints are more expensive as an initial investment; however, when fuel savings and dredging costs are taken into account, the total cost is often in your favour.

Technologies: self-polishing and non-polishing acrylics

Technology How does it work? Jotun examples
Self-polishing (hydrolysis-based) The surface wears away in a controlled manner as it comes into contact with water, constantly revealing a fresh, active surface. SeaForce 30 , SeaForce 60 , SeaForce 90
Silane acrylate The rate of polishing is more predictable; the aim is to achieve balanced performance over long service life. SeaQuantum Classic S, SeaQuantum Ultra S
Cost-effective solutions For shorter service intervals and limited budgets. Seaconomy 700, SeaMate M

Points to note during application

  • Achieve the dry film thickness specified in the technical data sheet; if applied too thinly, the paint will wear out prematurely.
  • Comply with the dew point and surface temperature conditions.
  • Allow the minimum curing time required before launching.
  • Apply an additional coat to high-wear areas such as the waterline and rudder.

Please inform us of your vessel’s length, intended use and your next dry-docking schedule; let us work together to determine the appropriate Jotun antifouling paint and the required quantity. All Jotun marine paints

FAQ

How often is Antifouling paint repainted?
This depends on the product’s intended service life and the boat’s usage. Products with short service intervals are replaced every season, whilst high-performance products are replaced at longer intervals, depending on the maintenance schedule.
Can new paint be applied over old Antifouling paint?
If the existing paint is sound and compatible, the new coat can be applied following cleaning and the application of a suitable primer. Please check the technical data sheet or contact us to confirm compatibility.
How thick should the Antifouling paint be applied?
The dry film thickness specified in the product data sheet shall be used as a guide. Applying the product too thinly will shorten its service life.

Let’s choose the right product together

Tell us about the surface, environment and conditions of use – we will send the right paint system, its data sheet and a quote the same day.